久久精品国产一区二区电影,国产欧美日韩,竹菊精品久久久久久久99蜜桃,私人影院播放器

Small meteorological station
Small meteorological station

Product Center

Contact Us

Shandong Wanxiang Environmental Technology Co., Ltd

contacts :Manager LIU

Telephone :13276362033

QQ:1294284350

Company Address:The second floor of the first accelerator of the Optoelectronic Industry Park, No. 155 Incubation Second Lane, High tech Zone, Weifang City, Shandong Province

Soil moisture monitoring station

Soil moisture monitoring station

update time :2025-03-14

Model:WX-GS3

Product Price: Electronic Negotiation

Product brand: Wanxiang Environment

Soil moisture monitoring station, also known as tubular soil moisture monitoring device, is a monitoring instrument used to monitor soil temperature and humidity, soil moisture, soil conductivity and other parameters. It can be widely used in the agricultural field
product details

Soil moisture monitoring station, also known as tubular soil moisture monitoring device, is a monitoring instrument used to monitor soil temperature and humidity, soil moisture, soil conductivity and other parameters. It can be widely used in the agricultural field

1. Product Introduction

The tubular soil sensor is a sensor used to monitor soil profile temperature, soil profile moisture, and soil profile conductivity. It integrates soil temperature, moisture, and conductivity and can be widely used in smart greenhouses, smart orchards, smart irrigation and other agricultural engineering fields.

2. Product Parameters

Sensor start time: 60S

Sensor power supply voltage: DC12V

Sensor supply current: 22mA

Sensor power consumption: 0.26W

Communication method: 485 Modbus RTU protocol

Measurement parameters: 3 layers can be measured simultaneously (the number of layers can be customized if the number is less than 10 layers)

Measurement principle: A mathematical model is established by measuring the soil dielectric constant, and a spiral measuring electrode is designed to measure the soil volume moisture content data.

parameterMeasuring rangeAccuracyResolutionunit

Soil temperature-30~70℃±0.3 (-10~70℃)0.01℃

Soil moisture0~100%±3% (loam soils) High organic matter soils (soil organic carbon content > 12%) High clay content soils (clay content > 45%) Calibration may be required for specific soil types due to their dielectric relaxation properties0.1%---

Soil conductivity0~20000us/cm±3% (0~10000us/cm) ±5% (full range)1us/cm

3. Advantages and characteristics

★A single soil tube sensor can measure soil parameters at multiple depths simultaneously, and the monitoring depth can be customized (less than 1M).

★The sensor adopts low power design, with power consumption as low as 0.26W, suitable for long-term unmanned monitoring in the field.

★Each layer of the sensor can independently measure temperature, humidity, and conductivity parameters.

★The sensor shell is made of imported PC material, which is high in strength, corrosion-resistant and environmentally friendly.

★The sensor's waterproof rating reaches IP67, suitable for long-term outdoor monitoring.

★The sensor measures the average humidity in a certain area, making up for the limitations of single-point measurement.

★The sensor adopts a self-designed spiral measuring electrode to improve the contact between the sensor and the soil and minimize the measurement error caused by air gap.

4. Precautions for use

a. The sensor should be used strictly in accordance with the installation and operating instructions.

b. When multiple sensors work at the same time, they must be separated by a distance of more than 3 meters.

c. The sensor measurement principle is limited. There should be no electromagnetic cables and strong magnetic radiation interference within a radius of 3 meters from the sensor measurement site to avoid huge errors and damage to the sensor measurement.

d. The installation environment of the sensor should be consistent with the measurement range of the sensor to avoid irregularities such as over-range.

e. The sensor should be installed away from strong acid, strong alkali, heavy oil, heavy metal environment.

f. The sensor is a soil measurement sensor. It is prohibited to use this sensor to measure other substances.

g. The sensor installation environment must not have strong vibration.

h. The sensor cannot be subjected to excessive external force.

i. Disassembly is prohibited. Unauthorized disassembly is considered as non-compliant behavior and no service will be provided subsequently.

5. Installation method

Drilling method:

1. Take the drill bit, handle and support rod. After completion, place the drill vertically on the ground, hold the handle tightly with both hands and press down clockwise to rotate slowly. (Note: Do not use too much force, and be sure to rotate slowly for several circles to prevent the drill bit from deviating and causing the hole to be crooked)


Soil moisture monitoring station


2. Take the soil auger out of the hole, put it in a basin, and use tools to collect the soil drilled into the basin for mixing with mud. (Note: The first drilled soil is not collected because it has too many impurities)


Soil moisture monitoring station


3. Repeat the above drilling and soil extraction process, and try to gently place the sensor into the hole (do not force the device to touch the bottom) to test whether the depth of the hole is appropriate; if there is a jam, use the soil extraction drill to correct it to ensure that the sensor is smoothly inserted and removed; until the hole depth is flush with the installation position marked by the sensor (zero scale line), the drilling is completed.

4. Pick out the soil impurities, stones, roots, and insoluble soil clods in the pot. Rub the soil into a fine powder to make it easier to mix with mud.

5. Pour in an appropriate amount of water and stir thoroughly until it becomes viscous; loam mud should generally not be thicker than "sesame paste".


Soil moisture monitoring station


6. Slowly pour the mud into the hole, about 1/2 of the hole; the amount can be increased or decreased as appropriate based on actual conditions.


Soil moisture monitoring station


7. Slowly put the sensor into the hole, turn it clockwise and press it down. Too fast may cause the bubbles to not be completely discharged. (Note: Do not pull up the sensor during the turning and pressing process to prevent the gas from being sucked into the hole again)

8. When the sensor is installed to the correct depth, some mud will overflow around the device, and the grouting is completed; at this time, the sensor installation depth is flush with the hole. (Note: remove the excess mud outside 3CM around the sensor to prevent agglomeration from affecting water infiltration)

Burial method: Use a pickaxe to dig a deep pit for the sensor, and bury the sensor with mud. Refer to the drilling method for processing details.



Product address:http://m.tianxingg.com/en/turang/1121.html
Hello, my friend!
What kind of support do you need? Our products is sure to satisfy you.
*Name
*Email
WeChat
Phone
Country
*Message
免费观看性欧美大片无片| 女人十八片毛片免费视频| 老旺的大肉蟒进进出出| 野外真人实战cs| 国产在线拍揄自揄视精品| 肉不停h共妻h山中猎户h| 久久久久免费毛a片免费一瓶梅| 巨大巨粗巨长 黑人长吊| 欧洲处破女www人鲁| 女人做爰高潮呻吟17分钟| 污污污污污污网站| 欧美人与劲物xxxxz0oz| 艳妇乳肉豪妇荡乳| 办公室里呻吟的丰满老师电影| 狠狠色婷婷久久综合频道毛片 | 玩弄丰满熟妇XXXXX性| 久久99精品久久久久婷婷| 男男调教后菊撑开扩张a片| 最近免费中文字幕中文高清百度| 浪荡人妻共32部黑人大凶器电影| 久久人妻熟女中文字幕av蜜芽| 性调教室高h学校| 国产黄a三级三级三级看三级| 一本一道人人妻人人妻αv| 在闺房里被强高h| 国产无套内射普通话对白| 免费又黄又爽又色的视频| 国产CHINESE白嫩小受GV| 女女车车的车车视频免费 | 公和我边做饭边做好爽| 美国色情巜肉欲横流| 日本a级毛片| 久久妇女高潮喷水多长时间| 久久人妻熟女中文字幕av蜜芽| 精品国产乱码一区二区三区app| 99久久久精品免费观看国产| 顶弄激情出轨h| 久久偷看各类WC女厕嘘嘘偷窃| 一对浑圆的胸乳被揉捏动态图| 行尸走肉第六季在线观看| 厨房掀起少妇裙子挺进去|